NPT - American tapered pipe
3/4-14 NPT pipe thread: 14 TPI, major Ø 26.67 mm.
Profile
| Designation | 3/4-14 NPT |
|---|---|
| Major (outside) diameter | 26.67 mm · 1.05" |
| Pitch | 1.814 mm · 14 TPI |
| Pitch diameter | 25.492 mm · 1.0036" |
| Minor diameter (external) | 24.444 mm · 0.9624" |
| Minor diameter (internal) | 24.706 mm · 0.9727" |
| Recommended tap drill | 23.42 mm |
Pipe threads are made up to a seal against the mating flanks, not tightened to a bolt preload, so no proof load or tightening-torque figure applies.
The bolt schedule collects the fasteners for one job onto a single sheet - tap drill, wrench size, grade and tightening torque on every line, taken straight from pages like this one. Free schedules hold 3 lines and are saved in this browser only.
3/4-14 NPT is a NPT pipe thread running at 14 threads per inch on a 26.67 mm major diameter. NPT is a 60° tapered thread that seals on the flanks; use a tapered reamer after drilling for a full-form thread.
All values are generated from the standard thread formulas (ISO 68-1 / ASME B1.1) and published standard tables - not hand-entered. See the full reference.
Drill 23.42 mm before tapping 3/4-14 NPT. NPT is a 60° tapered thread that seals on the flanks; use a tapered reamer after drilling for a full-form thread.
3/4-14 NPT is tapered. NPT is a 60° tapered thread that seals as the flanks wedge together, normally with thread sealant or PTFE tape.
3/4-14 NPT runs at 14 threads per inch, a pitch of 1.814 mm, on a major diameter of 26.67 mm.
No. Pipe threads are made up to a seal against the mating flanks, not tightened to a bolt preload, so no proof load or tightening-torque figure applies.
The pipe this thread runs on
NPS 3/4 pipe is 1.05 in across the outside whatever the schedule; at standard wall (std) the wall is 0.113 in and the bore 0.824 in.
Full dimensions for the standard wall · every schedule in the chart
Nearby sizes