ASME B36.19M (stainless steel pipe) · DN 10
Outside diameter 0.675" (17.14 mm), wall 0.091" (2.31 mm), inside diameter 0.493" (12.52 mm).
| Trade size | NPS 3/8 · DN 10 |
|---|---|
| Schedule | Schedule 40S · also STD |
| Standard | ASME B36.19M (stainless steel pipe) |
| Outside diameter | 0.675" · 17.14 mm · designated 17.1 mm in the metric column |
| Wall thickness | 0.091" · 2.31 mm |
| Inside diameter | 0.493" · 12.52 mm |
| Weight, plain end | not published |
Nominal Pipe Size is a label, not a measurement. NPS 3/8 pipe has an outside diameter of 0.675 inches, and it keeps that outside diameter in every schedule made. What the schedule number changes is the wall: at schedule 40s the wall is 0.091 inches, so the bore comes out at 0.493 inches.
That is the practical consequence. Fittings, flanges, supports and threading dies are sized to the outside diameter, so they fit any schedule of the same trade size. Flow, pressure drop and anything that has to pass through the pipe depend on the inside diameter, which changes with every schedule. Order by trade size and schedule; work your hydraulics from the bore.
Same outside diameter of 0.675 inches throughout - only the wall and the bore move.
| Schedule | Wall (in) | ID (in) | Weight (lb/ft) |
|---|---|---|---|
| Schedule 10 | 0.065 | 0.545 | 0.42 |
| Schedule 30 | 0.073 | 0.529 | 0.47 |
| Schedule 40 | 0.091 | 0.493 | 0.57 |
| Schedule 80 | 0.126 | 0.423 | 0.74 |
| Standard wall (STD) | 0.091 | 0.493 | 0.57 |
| Extra strong (XS) | 0.126 | 0.423 | 0.74 |
| Schedule 10S | 0.065 | 0.545 | not published |
| Schedule 80S | 0.126 | 0.423 | not published |
0.091 inches (2.31 mm). The outside diameter is 0.675 inches (17.14 mm) whatever the schedule, so this wall leaves an inside diameter of 0.493 inches.
0.493 inches (12.52 mm). Inside diameter is outside diameter minus twice the wall: 0.675 - 2 x 0.091 = 0.493 inches.
No. NPS 3/8 is a trade size, not a measurement. The pipe measures 0.675 inches across the outside and 0.493 inches across the bore in this schedule. Only the outside diameter is fixed across schedules.
Yes, at NPS 3/8. STD is the same 0.091 inch wall here. That coincidence is per size and does not hold everywhere: standard wall and schedule 40 part company above NPS 10, and extra strong and schedule 80 part company above NPS 8.
3 schedules at NPS 3/8 appear in only one of the published tables cross-checked for this section, so they are named rather than printed: 160, XXS, 5S. Everything shown above carries at least two independent sources.
This table runs from NPS 1/8 to NPS 24 and stops there. ASME B36.10M itself continues to NPS 80; those larger sizes are not carried here, so a size above NPS 24 is missing rather than undefined.
Dimensions are as defined by ASME B36.19M (stainless steel pipe). This site is an independent reference and is not affiliated with, endorsed by or approved by any standards body.
Every value on this page was cross-checked against 2 independent published sources:
Nearby sizes