Dimensions
| Trade size | NPS 5 · DN 125 |
|---|---|
| Schedule | Schedule 10S |
| Standard | ASME B36.19M (stainless steel pipe) |
| Outside diameter | 5.563" · 141.30 mm |
| Wall thickness | 0.134" · 3.40 mm |
| Inside diameter | 5.295" · 134.50 mm |
| Weight, plain end | not published |
ASME B36.19M (stainless steel pipe) · DN 125
5 inch Schedule 10S pipe
Outside diameter 5.563" (141.30 mm), wall 0.134" (3.40 mm), inside diameter 5.295" (134.50 mm).
Inside diameter
5.295"
134.50 mm · wall 0.134"
Why 5 inch pipe is not 5 inches
Nominal Pipe Size is a label, not a measurement. NPS 5 pipe has an outside diameter of 5.563 inches, and it keeps that outside diameter in every schedule made. What the schedule number changes is the wall: at schedule 10s the wall is 0.134 inches, so the bore comes out at 5.295 inches.
That is the practical consequence. Fittings, flanges, supports and threading dies are sized to the outside diameter, so they fit any schedule of the same trade size. Flow, pressure drop and anything that has to pass through the pipe depend on the inside diameter, which changes with every schedule. Order by trade size and schedule; work your hydraulics from the bore.
Other schedules in NPS 5
Same outside diameter of 5.563 inches throughout - only the wall and the bore move.
| Schedule | Wall (in) | ID (in) | Weight (lb/ft) |
|---|---|---|---|
| Schedule 5 | 0.109 | 5.345 | 6.36 |
| Schedule 10 | 0.134 | 5.295 | 7.78 |
| Schedule 40 | 0.258 | 5.047 | 14.63 |
| Schedule 80 | 0.375 | 4.813 | 20.8 |
| Schedule 120 | 0.500 | 4.563 | 27.06 |
| Schedule 160 | 0.625 | 4.313 | 32.99 |
| Standard wall (STD) | 0.258 | 5.047 | 14.63 |
| Extra strong (XS) | 0.375 | 4.813 | 20.8 |
| Double extra strong (XXS) | 0.750 | 4.063 | 38.59 |
| Schedule 5S | 0.109 | 5.345 | not published |
| Schedule 40S | 0.258 | 5.047 | not published |
| Schedule 80S | 0.375 | 4.813 | not published |
Frequently asked questions
What is the wall thickness of 5 inch schedule 10s pipe?
0.134 inches (3.40 mm). The outside diameter is 5.563 inches (141.30 mm) whatever the schedule, so this wall leaves an inside diameter of 5.295 inches.
What is the inside diameter of 5 inch schedule 10s pipe?
5.295 inches (134.50 mm). Inside diameter is outside diameter minus twice the wall: 5.563 - 2 x 0.134 = 5.295 inches.
Is 5 inch pipe actually 5 inches?
No. NPS 5 is a trade size, not a measurement. The pipe measures 5.563 inches across the outside and 5.295 inches across the bore in this schedule. Only the outside diameter is fixed across schedules.
Where this table stops
This table runs from NPS 1/8 to NPS 24 and stops there. ASME B36.10M itself continues to NPS 80; those larger sizes are not carried here, so a size above NPS 24 is missing rather than undefined.
Where these figures come from
Dimensions are as defined by ASME B36.19M (stainless steel pipe). This site is an independent reference and is not affiliated with, endorsed by or approved by any standards body.
Every value on this page was cross-checked against 3 independent published sources:
- ASME/ANSI B36.10/19 - carbon, alloy and stainless steel pipe dimensions - Engineering ToolBox, edition not stated (read 2026-08-27)
- Dimensions of steel and stainless steel pipes, ASME B36.10 and ASME B36.19 - Wermac, edition not stated (read 2026-08-27)
- Nominal Pipe Size - Wikipedia, revision read 2026-08-27 (read 2026-08-27)
Nearby sizes